Sentora Admin login not working after Enabling FREE SSL

[nscloud]

Hello,


My sentora admin login was not working , before enabling the Free SSL everything was fine now 

everything gone wrong. Before I was able to login to sentora admin using the IP of the server.

Now with https or with out https noting working I have added my /var/log/httpd error file below

Please help.

[TGates]

You should be logging into your panel using a sub domain similar to panel.doman.com and not by IP.
What tutorial did you use for setting up SSL?

You did not set it up properly. Also I noticed your localhost is trying to use port 8080 and not port 80.

Can't you just undo the changes you made?

What other customization's have you done?

[nscloud]

You should be logging into your panel using a sub domain similar to panel.doman.com and not by IP.
What tutorial did you use for setting up SSL?

You did not set it up properly. Also I noticed your localhost is trying to use port 8080 and not port 80.

Can't you just undo the changes you made?

What other customization's have you done?

Hi, thanks for the reply, is there any way we can undo the setting though ftp. As I don't have

the login and not able to access the panel I can only do it through FTP.

[Me.B]

you need to access thru SSH to the server to modify apache config.

M B

[nscloud]

you need to access thru SSH to the server to modify apache config.

M B

Hi, I have the SSH access let me know which file need to edit and what location 

was it. Did you have the default settings of that file please share and tell me how to do it.

[TGates]

What tutorial did you use to add the SSL ?? Just follow the steps backwards...

[nscloud]

What tutorial did you use to add the SSL ?? Just follow the steps backwards...

Hi, I have used this thread Link now there was no access to panel it was not possible to step backward.

if you know any way we can do it manually though SSH please tell me it will be help full

[TGates]

To get your login working again, you will need to edit /etc/sentora/configs/apache/httpd-vhosts.conf and remove all SSL additions and then restart apache. This will get you back up and running temporarily so you can undo any changes you made inside Sentora.

For the domain, change:

Code:

<VirtualHost *:443>

to

Code:

<VirtualHost *:80>

Remove the SSL lines:

Code:

SSLEngine on SSLProtocol ALL -SSLv2 -SSLv3 SSLHonorCipherOrder On SSLCipherSuite  ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256 SSLCertificateFile /etc/letsencrypt/live/domain.com/cert.pem SSLCertificateKeyFile /etc/letsencrypt/live/domain.com/privkey.pem SSLCertificateChainFile /etc/letsencrypt/live/domain.com/chain.pem # Keeping below for future upgrades. # Requires Apache >= 2.4 SSLCompression off

Also remove any port-forward settings if you added them.
Restart apache.