How to setup secondary name server

[paknet]

Here’s how we do DNS master slave auto replication… or better… slave —> master pull replication

Overview

On master DNS server we need to generate Bind slave zone file for rsync to fetch it from slave DNS server.

Than we need to set passwordless authentication between slave and master server. To do that we need to create and exchange private SSH keys (slave —> master).

Third part is rsyncing zone file(s) via secure socket from master to slave. After that we only need to reload bind service and we are done.

Step by step guide…

Master DNS server

Create folder for executable script

Code:

mkdir /root/bin

Create sh file, copy paste the content and set the “x” bit

Code:

vi /root/bin/generate_slave_zones.sh

Copy/Paste/change IP/save the following (Change the MASTER-SERVER-IP!!!)

Code:

#!/bin/sh # # Print out all domains listed in Sentora named.conf. for domain in `/bin/grep ^zone /etc/sentora/configs/bind/etc/named.conf | grep -v '"."' | grep -vi in-addr | /bin/awk '{print $2}'| /bin/awk -F\" '{print $2}'` # Print out all domains listed in zPanel named.conf. # for domain in `/bin/grep ^zone /etc/zpanel/configs/bind/etc/named.conf | grep -v '"."' | grep -vi in-addr | /bin/awk '{print $2}'| /bin/awk -F\" '{print $2}'` do        # Generate Bind slave zone file with correct master DNS IP.        /usr/bin/printf "zone \"${domain}\" {\n\ttype slave;\n\tfile \"slaves/${domain}.zone\";\n\tmasters { MASTER-SERVER-IP; };\n};\n"        # Write the file in exchange foder        done > /root/named_slave_zones_transfer/named.conf.slave.zones

Set the eXecute bit

Code:

chmod a+x /root/bin/generate_slave_zones.sh

Create zone exchange folder

Code:

mkdir /root/named_slave_zones_transfer

Run the script and check generated file contents

Code:

/root/bin/generate_slave_zones.sh cat /root/named_slave_zones_transfer/named.conf.slave.zones

You should see something like this…

Code:

zone “domain.com” {    type slave;    file "slaves/domain.com.zone";    masters { MASTER-SERVER-IP; }; };

Add script to crontab… 

Code:

crontab -e

Copy/paste/save the following. Script will be executed every 5 minutes. Change this according to your needs

Code:

# Named slave zone generator */5 * * * * /root/bin/generate_slave_zones.sh

Add Slave DNS server to acl trusted-servers pool in named.conf

Code:

vi /etc/named.conf

Modify the following … (add the SLAVE-SERVER-IP). Without this line Bind zone transfer from Slave DNS server will fail!!!

Code:

acl trusted-servers {    MASTER-SERVER-IP;     // ns1    SLAVE-SERVER-IP;      // ns2 };

Install rsync

Code:

yum install rsync

Slave DNS server

Create public and private keys using ssh-keygen on slave server

Code:

ssh-keygen

Confirm default file name to save the key and leave empty passphrase. 
This will generate the following files

Code:

ll /root/.ssh/id* -rw------- 1 root root 1.7K Feb  6 00:33 /root/.ssh/id_rsa -rw-r--r-- 1 root root  403 Feb  6 00:33 /root/.ssh/id_rsa.pub

Tighten up file permissions

Code:

chmod 700 /root/.ssh chmod 600 /root/.ssh/* ls -ld /root/.ssh & ls -l /root/.ssh

Now copy the public key to the master server and fix permissions (you will be prompted for the root password)

Code:

ssh root@MASTER-SERVER-IP 'mkdir -p /root/.ssh' scp /root/.ssh/id_rsa.pub root@MASTER-SERVER-IP:/root/.ssh/authorized_keys ssh root@MASTER-SERVER-IP 'chmod  700 /root/.ssh' ssh root@MASTER-SERVER-IP 'chmod  600 /root/.ssh/*'

You should now be able to ssh from slave to master server without providing a password

Code:

ssh root@MASTER-SERVER-IP

On Slave DNS server install rsync package

Code:

yum install rsync

create folder for executable script

Code:

mkdir /root/bin

Create sh file, copy paste the content and set the “x” bit

Code:

vi /root/bin/named-fetch-slave-zones.sh

Copy/Paste/change IP/save the following (Change the MASTER-SERVER-IP and MASTER-HOSTNAME!!!)

Code:

#!/bin/bash # tmp direcotry DIRECTORY=/root/named-slave-fetch # Create dir if not exists if [ ! -d "$DIRECTORY" ]; then    mkdir $DIRECTORY fi cd $DIRECTORY # Rsync via ssh from master to slave /usr/bin/rsync -e ssh root@MASTER-SERVER-IP:/root/named_slave_zones_transfer/named.conf.slave.zones . if [ $? -eq 0 ] then        # Copy zone file to bind zone slave folder and rename it        /bin/cp -u named.conf.slave.zones /var/named/slaves/slave-zones-MASTER-HOSTNAME.conf        # Change ownership permissions        /bin/chown root.named /var/named/slaves/slave-zones-MASTER-HOSTNAME.conf        # Change file permissions        /bin/chmod 644 /var/named/slaves/slave-zones-MASTER-HOSTNAME.conf        # Reload Bind (named) - CENTOS 6        /sbin/service named reload        # Reload Bind (named) - CENTOS 7        # /usr/sbin/service named reload else        echo "Slave zone file download failed." fi

Set the eXecute bit

Code:

chmod a+x /root/bin/named-fetch-slave-zones.sh

Include the slave zone file in named.conf

Code:

vi /etc/named.conf

On the end of the file add the following line (change the hostname)

Code:

include "/var/named/slaves/slave-zones-MASTER-HOSTNAME.conf";

Run the sh script

Code:

/root/bin/named-fetch-slave-zones.sh

Check the messages log file. You should see something like

Code:

zone domain.com/IN: Transfer started. transfer of ‘domain.com/IN' from MASTER-SERVER-IP#53: connected using SLAVE-SERVER-IP#49764 zone domain.com/IN: transferred serial 000000000 transfer of ‘domain.com/IN' from MASTER-SERVER-IP#53: Transfer completed:

Last step… edit the crontab

Code:

crontab -e

and add

Code:

# Named - Fetch slave zones from master */5 * * * * /root/bin/named-fetch-slave-zones.sh

This was tested in Centos 6/7 environment, but with minor changes it should also work on Ubuntu.

Thats it. Hope it helps.