Install CSF Firewall

[apinto]

Well, it depends on what you have running on the server....

[Me.B]

Yep 512 MB if you have few pages per minute you won't see any issue. But plugin there some WP sites with intersting load and you will see MySQL crawling then Apache blowing out.

M B

[shanjie]

Code:

wget --no-check-certificate https://raw.github.com/stokes84/ConfigServer-Firewall-Installer/master/install.sh; bash install.sh; rm -f install.sh

One single line of code , you have than CSF & GUI Panel for CSF

I cant seem to be get this work...

[JVaranda]

I have used this tutorial in Portuguese to install CSF with web interface:
http://portaldohost.com.br/forum/topic/1...ldawebmin/

[khongtuong]

work great without problem, thank you!

[Qtech]

Code:

wget --no-check-certificate https://raw.github.com/stokes84/ConfigServer-Firewall-Installer/master/install.sh; bash install.sh; rm -f install.sh

One single line of code , you have than CSF & GUI Panel for CSF

Anyone got a full write up on install.
Ran this. Install logs show everything is good.
Ran csfperltest and all is good.
But I can not access via https://ipaddress:port

Do I have to set anything else up in Sentora?

[TGates]

You need to make sure https is actually working and that the port is open that you are trying to go to. If it is https port (443) you do not need to add :443 to the end. If you are using a different port, you need to make sure that port has a Listen XXX in the httpd-vhosts.conf

[Qtech]

You need to make sure https is actually working and that the port is open that you are trying to go to. If it is https port (443) you do not need to add :443 to the end. If you are using a different port, you need to make sure that port has a Listen XXX in the httpd-vhosts.conf

Should I do this Override a Virtual Host Setting
> select subdomain used for sentoral panel
> custom entry

I am assuming http-vhost.conf will otherwise get overwritten.

Also does the path to CSF have to be anything specific.

[TGates]

I just noticed this:

But I can not access via https://ipaddress:port

You can not connect to an IP address using HTTPS. You should be using a domain for https. At least not with any tutorials on this site.

What is it you are trying to connect to using the IP?

[CMs222]

Got it up and running but can only access via local ip 192.168.* :port assigned
with https:// in front...

cannot access via https://mydomain:port-assigned
also tried via https://cpanel.mydomain:port-assigned.

also once logged in i getting this error.
*WARNING* URLGET set to use LWP but perl module is not installed, reverting to HTTP::Tiny

any suggestions on where i may have gone wrong or how to fix this ?
thanks