1.0.2 1.0.3 postfix fix not work

[andykimpe]

141.94.79.225 port 25

Code:

systemctl status postfix ● postfix.service - Postfix Mail Transport Agent Loaded: loaded (/lib/systemd/system/postfix.service; enabled; vendor preset: enabled) Active: active (exited) since Fri 2021-06-11 23:08:01 CEST; 1min 1s ago Process: 6762 ExecStart=/bin/true (code=exited, status=0/SUCCESS) Main PID: 6762 (code=exited, status=0/SUCCESS)

there are no firewalls

iptables -nvL

Code:

Chain INPUT (policy ACCEPT 67 packets, 6267 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 70 packets, 7439 bytes) pkts bytes target prot opt in out source destination

[ccr1969]

To fix this, I changed the postfix "master.cf": /etc/postfix/master.cf

Code:

# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - y - - smtpd

I just changed the "y" to a "n", reboot the server (postfix reload didn't seem to work). I was then able to telnet to my server on port 25!

---

also port 25 maybe blocked by your provider maybe try 465

[andykimpe]

are you sure you're on sentora

the sentora postfix config her and here

/etc/sentora/configs/postfix/master.cf

the /etc/postfix/master.cf file and a symbolic link that points to /etc/sentora/configs/postfix/master.cf

file /etc/sentora/configs/postfix/master.cf

Code:

# # Postfix master process configuration file. For details on the format # of the file, see the Postfix master(5) manual page. # # ***** Unused items removed ***** # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd # -o content_filter=smtp-amavis:127.0.0.1:10024 # -o receive_override_options=no_address_mappings pickup fifo n - n 60 1 pickup -o content_filter= -o receive_override_options=no_header_body_checks cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # ==================================================================== maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # # spam/virus section # smtp-amavis unix - - y - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_lookups=yes -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - y - - smtpd -o content_filter= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o receive_override_options=no_header_body_checks -o smtpd_helo_required=no -o smtpd_client_restrictions= -o smtpd_restriction_classes= -o disable_vrfy_command=no -o strict_rfc821_envelopes=yes # # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/lib/dovecot/deliver -d ${recipient} # # Vacation mail vacation unix - n n - - pipe flags=Rq user=vacation argv=/var/spool/vacation/vacation.pl -f ${sender} -- ${recipient}

its perfectly matches what and on the github

https://github.com/sentora/sentora-insta.../master.cf

[ccr1969]

are you sure you're on sentora

the sentora postfix config her and here

/etc/sentora/configs/postfix/master.cf

the /etc/postfix/master.cf file and a symbolic link that points to /etc/sentora/configs/postfix/master.cf

file /etc/sentora/configs/postfix/master.cf

Code:

# # Postfix master process configuration file.  For details on the format # of the file, see the Postfix master(5) manual page. # # ***** Unused items removed ***** # ========================================================================== # service type  private unpriv  chroot  wakeup  maxproc command + args #               (yes)   (yes)   (yes)   (never) (100) # ========================================================================== smtp      inet  n       -       n       -       -       smtpd #  -o content_filter=smtp-amavis:127.0.0.1:10024 #  -o receive_override_options=no_address_mappings pickup    fifo  n       -       n       60      1       pickup  -o content_filter=  -o receive_override_options=no_header_body_checks cleanup   unix  n       -       n       -       0       cleanup qmgr      fifo  n       -       n       300     1       qmgr #qmgr     fifo  n       -       n       300     1       oqmgr tlsmgr    unix  -       -       n       1000?   1       tlsmgr rewrite   unix  -       -       n       -       -       trivial-rewrite bounce    unix  -       -       n       -       0       bounce defer     unix  -       -       n       -       0       bounce trace     unix  -       -       n       -       0       bounce verify    unix  -       -       n       -       1       verify flush     unix  n       -       n       1000?   0       flush proxymap  unix  -       -       n       -       -       proxymap smtp      unix  -       -       n       -       -       smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay     unix  -       -       n       -       -       smtp        -o fallback_relay= #       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq     unix  n       -       n       -       -       showq error     unix  -       -       n       -       -       error discard   unix  -       -       n       -       -       discard local     unix  -       n       n       -       -       local virtual   unix  -       n       n       -       -       virtual lmtp      unix  -       -       n       -       -       lmtp anvil     unix  -       -       n       -       1       anvil scache    unix  -       -       n       -       1       scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # ==================================================================== maildrop  unix  -       n       n       -       -       pipe  flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp      unix  -       n       n       -       -       pipe  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail    unix  -       n       n       -       -       pipe  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp     unix  -       n       n       -       -       pipe  flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # # spam/virus section # smtp-amavis  unix  -    -       y       -       2       smtp  -o smtp_data_done_timeout=1200  -o disable_dns_lookups=yes  -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n  -       y       -       -       smtpd  -o content_filter=  -o smtpd_helo_restrictions=  -o smtpd_sender_restrictions=  -o smtpd_recipient_restrictions=permit_mynetworks,reject  -o mynetworks=127.0.0.0/8  -o smtpd_error_sleep_time=0  -o smtpd_soft_error_limit=1001  -o smtpd_hard_error_limit=1000  -o receive_override_options=no_header_body_checks  -o smtpd_helo_required=no  -o smtpd_client_restrictions=  -o smtpd_restriction_classes=  -o disable_vrfy_command=no  -o strict_rfc821_envelopes=yes # # Dovecot LDA dovecot   unix  -       n       n       -       -       pipe  flags=DRhu user=vmail:mail argv=/usr/lib/dovecot/deliver -d ${recipient} # # Vacation mail vacation    unix  -       n       n       -       -       pipe  flags=Rq user=vacation argv=/var/spool/vacation/vacation.pl -f ${sender} -- ${recipient}

its perfectly matches what and on the github

https://github.com/sentora/sentora-insta.../master.cf

hi yes im just short coding stuff lol as mines on a virtual server for practice as i run windows so im just trying to follow it

---

yes i see its correct
 maybe you need to add it
/etc/sentora/configs/postfix/mynetworks  ?

Code:

# This specifies the list of subnets that Postfix considers as # "trusted" SMTP clients that have more privileges than "strangers". # # In particular, "trusted" SMTP clients are allowed to relay mail # through Postfix. # # Be sure to add your public ip address block if needed. # 176.31.61.0/28 127.0.0.0/8

[andykimpe]

it is already present with the same content this file

[ccr1969]

well try different port see if it makes any difference as some providers block port 25

[andykimpe]

it is not the case of the supplier it is ovh

ovh does not block port 25 it name never made its in 20 years

it's not now that we start

---

moreover it is a problem of blocking of port even locally it not responds

Code:

telnet localhost 25 Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused

[ccr1969]

it is not the case of the supplier it is ovh

ovh does not block port 25 it name never made its in 20 years

it's not now that we start

---

moreover it is a problem of blocking of port even locally it not responds

Code:

telnet localhost 25 Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused

i can ping 141.94.79.225
but connection is refused on 141.94.79.225:25
open on port 22
if i telnet 110 i get +OK Dovecot (Ubuntu) ready.
143 * OK Waiting for authentication process to respond..
* OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN AUTH=LOGIN] Dovecot (Ubuntu) ready.





but 25 467 587 cant connect refusal so ports closed

---

sudo ufw allow 465/tcp
sudo ufw allow 25/tcp
sudo ufw allow 587/tcp

---

220 test-server ESMTP
thats what i get when i telnet my test server

---

try this put in master.cnf
smtp inet n - n - - smtpd
25 inet n - n - - smtpd
587 inet n - n - - smtpd
465 inet n - n - - smtpd
then run the following commands :

service postfix reload

service postfix restart

---

netstat -plutn | grep 465
netstat -plutn | grep 25
netstat -plutn | grep 587

root@test-server:~# netstat -plutn | grep 587
tcp 0 0 0.0.0.0:587 0.0.0.0:* LISTEN 1836/master
tcp6 0 0 :::587 :::* LISTEN 1836/master
root@test-server:~# netstat -plutn | grep 465
tcp 0 0 0.0.0.0:465 0.0.0.0:* LISTEN 1836/master
tcp6 0 0 :::465 :::* LISTEN 1836/master
root@test-server:~# netstat -plutn | grep 25
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 1836/master
tcp 0 0 127.0.0.1:10025 0.0.0.0:* LISTEN 1836/master
tcp6 0 0 :::25 :::* LISTEN 1836/master

i didn't have listening ports till i added them in master.cnf

[andykimpe]

but you're stupid I told you who was to deactivate the firewall why you want to make me activate it you your although already in localhost it does not respond if it does not respond in localhost it cannot operate remotely

Code:

sudo ufw disable sudo iptables -F sudo iptables -X sudo iptables -t nat -F sudo iptables -t nat -X sudo iptables -t mangle -F sudo iptables -t mangle -X sudo iptables -P INPUT ACCEPT sudo iptables -P FORWARD ACCEPT sudo iptables -P OUTPUT ACCEPT

and even with all the ports put in postfix it does not work then which returns active day on the status

[ccr1969]

but you're stupid I told you who was to deactivate the firewall why you want to make me activate it you your although already in localhost it does not respond if it does not respond in localhost it cannot operate remotely

Code:

Code:

sudo ufw disable sudo iptables -F sudo iptables -X sudo iptables -t nat -F sudo iptables -t nat -X sudo iptables -t mangle -F sudo iptables -t mangle -X sudo iptables -P INPUT ACCEPT sudo iptables -P FORWARD ACCEPT sudo iptables -P OUTPUT ACCEPT

and even with all the ports put in postfix it does not work then which returns active day on the status

well if i'm stupid your on your own no point helping